How to prevent the sintered mesh filter from being flattened?

The sintered mesh filter element is very commonly used, and the sintered mesh filter element has the highest mechanical strength and compressive strength. The sintered mesh filter element has good processing, welding and assembly performance, and is easy to use. The filter layer of the sintered mesh filter element is on the second layer, so that it is well protected and shunted, and the filtration accuracy can achieve uniform and consistent filtration performance, ensuring the high stability of the sintered mesh filter element.

But not all users know how to use the sintered mesh filter correctly. Improper use of the sintered mesh filter or the selection of an inappropriate sintered mesh filter will cause flattening during the work of the filter element. How can we avoid it completely? Woolen cloth?

1. The sintered mesh filter element is not properly selected.

When selecting the type of sintered mesh filter element, it is not suitable for the current working environment. The precision of the filter element is too high, or the pressure exceeds its allowable higher working pressure. It will also cause the filter element to be sucked flat.

2. Improper installation of the sintered mesh filter element.

The installation of the sintered mesh filter element should be accurate and stable, and the filtering work has already started before the filter element is fixed, so that the filter element will be damaged.

3. The sintered mesh filter element is clogged and not replaced in time.

The sintered mesh filter element was seriously blocked by pollutants during work and was not cleaned in time, resulting in an increase in the pressure difference of the filter element, and the insufficient strength of the filter element caused the sintered mesh filter element to be sucked flat.

If the sintered mesh filter element is used properly, it will exert greater advantages. The principle of the stainless steel sintered mesh filter element is also very special. It uses a special dust removal method for dust removal. The 316l stainless steel sintered mesh filter element will have a better effect than the electrostatic precipitator, and the filtering effect of special particles such as quartz sand and sand will be Better.

In addition, the stainless steel sintered mesh filter element also has good advantages in filtering some special gases, and the corrosion resistance effect of the sintered mesh filter element is relatively good. Therefore, stainless steel sintered mesh filter elements are used in many places now. When we choose, we still have to choose the appropriate specifications according to our own working conditions, so that the sintered mesh filter elements can be better utilized.