What are the cleaning methods for sintered mesh?

Sintered mesh is a filter material that can be cleaned repeatedly. Common cleaning methods include: ultrasonic cleaning, baking cleaning, reverse water cleaning, and filtrate cleaning.

Ultrasonic cleaning is a method of taking the sintered mesh out of the equipment and cleaning it with a special ultrasonic wave. The advantage of ultrasonic cleaning is that the cleaning is thorough and clean; however, it has a great impact on production efficiency because it needs to be disassembled and cleaned every time.

Baking cleaning can also be called heat treatment cleaning method. This method is generally used when the legal cleaning method is not effective. It is necessary to heat the oven first and then dissolve the sticky substances.

The reverse water cleaning method can also be called the reverse cleaning method. The specific operation method is to blow the inert gas such as nitrogen to the sintered mesh from the opposite direction to flush. This method does not need to take the sintered mesh out of the equipment, and can directly reverse the operation, saving time and effort.

These flushing methods have their own advantages and disadvantages, and can be properly selected according to different needs in practical applications.

Advantages of sintered mesh:

1. High strength and high rigidity

Compared with other products, sintered mesh has great advantages in strength and rigidity, and has good performance in processing, welding and assembly, and is more convenient to use.

2. The precision is high and uniform, and the filter coefficient is relatively stable

The processing technology of the sintered mesh determines its quality. During the filtration process, the mesh size of the sintered mesh will not change, and the long-term filtration can still achieve uniform filtration accuracy.

3. It can be applied in many different environments

This kind of product can be applied in both acidic environment and alkaline environment, and the temperature requirement is not high. It can be applied at a low temperature of minus 200 degrees to a high temperature of 6000 degrees.

4. It can be used repeatedly, and it only needs to be cleaned regularly

The sintered mesh can be used repeatedly. After a period of use, if the filtration accuracy is affected and the mesh is blocked, there is no need to replace the product. It is only necessary to clean the product. The cleaning method is relatively simple. If you do not want to disassemble, just use backwashing directly For special industries, ultrasonic cleaning or dissolution cleaning can be used.