What are the details of installing and purchasing large flow filter elements?

The large flow water filter element is used in the corresponding filter. There are several aspects that need special attention when using, which affect the service effect and service life of the large flow filter element.

Details about the application of high flow filter element in the filter:

① The flow at the inlet and outlet.

For the filter, the external inlet and outlet flow is the actual inlet and outlet flow. If its direction is different, its positive and negative halo motion will change accordingly.

② For the aperture recognition of the filter.

The internal and external framework of the large flow filter element is generally made of polypropylene PP, which needs to be marked in detail when leaving the factory, including its aperture and internal and external framework materials.

③ Disinfect before filter application

There are two main disinfection methods for filters:

1. Disinfect online. First install the large flow filter element in the filter. Pay attention to the installation method. Make sure the installation is correct. Then use the method of releasing steam to sterilize for 0.5-1 hours;

2. Put the large flow filter element into the disinfection cabinet, and keep the temperature at 120 ℃ for disinfection, about half an hour.

The correct large flow filter element can play its due role in the filter. When purchasing the large flow filter element, pay special attention to its model. If the model is different, it cannot be used. The large flow filter element is not a universal product. Different types of large flow water filter elements are required for different filters.

Therefore, when purchasing a large flow filter element, pay special attention to its model. It needs to be matched with the corresponding filter. The appearance is mainly reflected in the end cover. Different models of end covers will be different. Pay attention to the pressure in terms of performance. Different models of large flow filter elements have different pressure.

Method and process for installing large flow filter element in the filter:

① First of all, during the whole process of installing the large flow filter element, try to avoid directly touching the filter and water filter element with hands to avoid pollution;

② The fins in the filter are pressed with stainless steel orifice plates to avoid too much pressure and too tight pressure on the filter element when fixing the large flow water filter element, which may cause the filter element to deform when not in use;

③ When using or closing the filter with power on, pay attention when turning the valve to avoid too violent turning of the valve, which may lead to deformation of the filter element during disinfection;

④ When installing the large flow water filter element, it should be aligned with the stainless steel circular groove and installed vertically as far as possible to avoid dislocation.

Previous: Factors affecting the service life of cartridge filter element.