High flow filter

The high-flow filter element adopts deep fine polypropylene or glass fiber membrane as the filter material, has a large diameter of 6 inches/152mm, no central rod, One-way opening and specially designed liquid flow direction from inside to outside to ensure that all pollutant particles are intercepted inside the filter element. The design of ultra-large flow reduces the usage of filter element and filter in the same flow application, which greatly saves equipment investment cost and labor cost.

Application

RO security filtration, seawater desalination pretreatment; filtration of condensed water in power plants; filtration of raw materials, solvents, and water in biopharmaceutical industry, etc.

Filter media

water suspended solids, particulate matter, water fouling, bacteria and algae, rust, etc.

Use pH:  1-13

Maximum differential pressure:  2.0Bar

Overspeed accuracy:  1μm、3μm、5μm、10μm、25μm、50m、100μm

Interface form:  flat press-in type (other interfaces can be added)

Gasket/Seal:  Silicone rubber, ethylene propylene rubber, nitrile rubber, fluorine rubber

Design of sealing interface:

rubber sealing ring is adopted, which is safe and non-toxic and prevents leakage.

Using high-quality materials:

The outer-in and inner-out structure of the high-flow filter element makes the replacement of the filter element easy, while keeping the pollutants intercepted on the outside of the filter element.

The equipment is easy to use:

multiple filter elements can be installed in the filter housing, and a wide flow range can be used.